新闻资讯【NEWS】more>>
行业新闻

当前位置:网站首页 > 新闻资讯 > 行业新闻

  • 铝格栅的施工工艺
  • 本站编辑:杭州欧宏建材有限公司发布日期:2019-10-10 21:47 浏览次数:
铝格栅吊顶工艺流程、操作工艺
1.确定好高度,在墙上用墨斗弹高水平线
2.用铁的膨胀栓把吊筋固定在顶上,吊筋下面固定轻钢龙骨要保持水平(如果格栅跨度不超过3米就不需要吊筋了)
3.用水泥钉把铝角线沿水平线钉好
4.把铝格栅放地上组拼完整
5.把组拼好的格栅天花放在铝角铁上面,中间的位置用细铁丝直接扎在轻钢龙骨上.

Aluminum grille hoisting process and operation technology
1. Determine the height and use ink to bomb the high level on the wall
2. Use an iron expansion bolt to fix the hamstring to the top, and fix the light steel keel under the hamstring to maintain the horizontal(if the grid span does not exceed 3 meters, no hamstring is required)
3. Pin the aluminum diagonal along the horizontal line with cement nails
4. Put the aluminum grille on the ground and complete it
5. Place the grille ceiling of the group on the aluminum corner iron, and the middle position is directly tied to the keel of light steel with fine wire.