NEWS

新闻资讯

  • 分享凹槽型材方通的选择技巧
  • 本站编辑:杭州欧宏建材有限公司发布日期:2018-08-16 16:48 浏览次数:
  凹槽型材方通的选择技巧主要有三个方面:
 
  There are three main aspects of selection techniques for groove profiles.
 
  一、材质
 
  One, material
 
  目前市场上的铝材主要有以下几种:按铝材的产地分为普通铝材、广铝、西南铝;按铝材的国际标号又分为1100、3003、5005等标号;按铝材的合金强度分为H24、H18等;按铝材的韧性分为普通铝材、铝镁合金、铝锰合金。现在市场上销售的吊顶材料中大部分都采用普通的铝材,其特点是强度低,平整度一般,韧性强,不变形。没有好的基材,会大大影响铝方通的使用寿命。
 
  At present, there are several kinds of aluminium materials on the market: ordinary aluminium, Guangzhou aluminium and southwest aluminium according to the origin of aluminium materials; according to the international standard of aluminium materials, it is divided into 1100, 3003, 5005, etc; according to the alloy strength of aluminium materials, it is divided into H24, H18 and so on; according to the toughness of aluminium materials, it is divided into ordinary aluminium, aluminium magnesium alloy, aluminium manganese alloy. Most of the ceiling materials sold on the market now use ordinary aluminum, which is characterized by low strength, general flatness, strong toughness, no deformation. Without good base material, it will greatly affect the service life of Al Fang Tong.
型材方通
 
  二、表面处理
 
  Two. Surface treatment
 
  目前铝方通的表面处理主要有以下几种:喷涂、烤漆、滚涂、覆膜。其中喷涂、烤漆使用寿命短,容易出现色差,滚涂使用寿命居中,覆膜板又可分为普通膜与进口膜,进口膜的使用寿命基本上能达到20年不变色。
 
  At present, the surface treatment of Al Fang Tong mainly includes the following kinds: spraying, baking, rolling and laminating. The service life of spraying and baking paint is short, color difference is easy to appear, the service life of rolling coating is in the middle, and the coated plate can be divided into ordinary film and imported film. The service life of imported film can basically reach 20 years without color change.
 
  三、工艺
 
  Three, process
 
  所谓工艺就是板材有表层的粘合,这是消费者比较忽略的一块。如果工艺不好对于产品的使用寿命影响非常大,目前市场上的铝方通厂家处理工艺有很大的区别,很多小厂基本上是采取作坊式、工艺寿命降低。建议进行铝方通选择时,一定要了解清楚这一块。
 
  The so-called technology is the surface of the sheet bonding, which is a consumer ignored. If the process is not good for the service life of the product has a very big impact, the current market of Aluminum Fangtong manufacturers processing technology is very different, many small factories are basically adopted workshop, process life is reduced. When choosing aluminum side pass, we must know clearly about this piece.